Are you currently preparing for the WatchGuard Fireware Essentials certification examination? Are you unsure where to start your preparation? This step-by-step guide will help you to increase your learning and open up new opportunities. The WatchGuard Fireware Essentials certification test tests your knowledge about how to manage, configure, and monitor a WatchGuard Firebox. This exam is for network administrators who are familiar with Fireware v12.2.1 and have experience in configuring and managing Firebox devices. This exam will help you validate your knowledge and demonstrate your skills. This exam will help you get ahead.
The key concepts: WatchGuard Essentials Certification in Fireware
These key concepts are essential to pass the exam successfully.
Fireware Knowledge
Firstly, Firebox activation and initial setup
Second, Network configuration
Thirdly, Policy configuration and proxy configuration
You can also subscribe to services
Furthermore, User authentication n Device monitoring, logging, and reporting
Finally, branch office and mobile VPN configuration
General IT Knowledge
IPv4 networking concepts (DNS/IP, TCP/IP and NAT, static routing, DHCP) are the best to start with.
Also, general understanding firewalls
WatchGuard Fireware Essentials Study Guide
Preparation is key to passing an exam. Preparation requires consistency and determination. Our Study Guide is specially designed to help you get the WatchGuard Fireware Essentials Certificate in the first attempt. Let’s go over each step.
Step 1: Visit the Official Website of WatchGuard Fireware Essentials
Visit the Official Site to review all exam objectives. Before you begin to prepare for the exam, it is important to familiarize yourself with the concepts and course of the exam. Spend enough time on each topic and be familiar with the subject. These are the 7 domains covered by this exam:
Domain 1- Device Administration – 20%
This domain covers how to set up and configure a Firebox or XTM device. You can also connect to Fireware XTM Web UI to edit a device configuration in Policy Manager, and install a feature code. You can also upgrade or downgrade Fireware XTM OS. Create a backup image of your device and enable remote administration. You can also configure role-based administration to understand Fireware’s default threat protection features.
Domain 2- Authentication- 5%
This domain is designed to teach you how to configure Firebox authentication for users or groups. You can also configure user authentication using a third party authentication server
Domain 3- Device Monitoring, Logging and Reporting-15%
This domain also covers topics such as using WatchGuard System Manager or Firebox System Manager for device monitoring, Dimension to monitor devices, and Firebox System Manager for diagnostic tasks. You can also set up a WatchGuard Log Server and enable logging to a Dimension Log Server/a WatchGuard Log Server. Also, you can review log messages from a Firebox or XTM devices and learn how to enable logging for reports
Domain 4- Networking and Network Address Translations (NAT) -15%
This domain covers concepts for configuring an external, trusted, optional or custom interface. It also includes how to create secondary networks on an interface. You can also add a static routing and review the Route table. Also, configure DNS and WINS. Learn when to use dynamic, 1-to-1, static NAT and NAT loopback, and how to configure dynamic NAT and 1-to-1.
Domain 5-Policies, Proxies and Application Layer Gateways-15%
This domain also covers concepts such as policy precedence, the function and purpose of default firewall policies, and the function and function of incoming proxy actions. You will also learn how to configure policies for different users or groups, Firebox authentication and g